$114.47 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Ontario, California, United States
Ships to: US,
Item: 252834422495
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Placement on Vehicle:Front, Left, Right, Upper, Lower
Type:Control Arm & Ball Joint Assembly
Universal Fitment:No
Control Arm Construction:Forged
Items Included:Mounting Hardware
Custom Bundle:Yes
Interchange Part Number:ES3488 K80631 ES3609 K6693 K6654 K6535 K620053
OE/OEM Part Number:Suspension Control Arms and Ball Joints Assembly
Superseded Part Number:Front Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
topcn-autoparts:topcn-autoparts
UPC:Does not apply
Manufacturer Part Number:TA80190701P
Adjustable:Yes
Modified Item:Yes
Kit Parts Included:Control Arm,Ball Joint
Kit or Single Part:Kit
Greasable or Sealed:Greasable
OE Spec or Performance/Custom:OE Spec
Surface Finish:Polished, Rust Protected
Quantity:12 Pcs
Bundle Description:Control Arm with Ball Joint Idler Arm Pitman Arm
Cross Reference Part Number:Yukon XL 2500, Chevy GMC Hummer Ball Joint
Package Includes:12 Piece Set Front Left Right Driver Side Passenger Side
Cross Reference Part Number 1:Sierra 3500 Classic Silverado 1500 HD Silverado 1500 HD Classic
Partslink-number:Sierra 2500 Sierra 2500 HD Sierra 2500 HD Classic Sierra 3500
Features:Greasable
Finish:Coated
Cotter Pin Hole:Yes
Material:Alloy Steel
Mounting Style:Bolt-On
eBay 1.Fit For 12pc Front Complete Suspension Kit for Chevy Silverado GMC Sierra 2500 3500 HD 1.Fit For 2002-2006 Chevrolet Avalanche 2500 2001-2006 Chevrolet Silverado 1500 HD 2001-2004 Chevrolet Silverado 2500 2001-2010 Chevrolet Silverado 2500 HD 2001-2006 Chevrolet Silverado 3500 2007-2010 Chevrolet Silverado 3500 HD 2001-2010 Chevrolet Suburban 2500 2001-2006 GMC Sierra 1500 HD 2007-2010 Chevrolet Silverado 3500 HD 2001-2010 Chevrolet Suburban 2500 2001-2006 GMC Sierra 1500 HD 2001-2004 GMC Sierra 2500 2001-2010 GMC Sierra 2500 HD 2001-2006 GMC Sierra 3500 2007-2010 GMC Sierra 3500 HD 2001-2010 GMC Yukon XL 2500 2003-2007 Hummer H2 2007 Chevrolet Silverado 3500 Classic 2007 GMC Sierra 1500 HD Classic 2007 GMC Sierra 1500 HD Classic 2007 GMC Sierra 2500 HD Classic 2007 GMC Sierra 3500 Classic 2007 Chevrolet Silverado 1500 HD Classic 2007 Chevrolet Silverado 2500 HD Classic 2.Package Includes: Upper Ball Joints Come Pre-Assembled Onto the Upper Control Arms 2x Part# Front Inner Tie Rods Ends – ES3488 2x Part# Front Sway Bars End Links – K80631 2x Part# Front Outer Tie Rods Ends – ES3609 2x Part# Front Lower Ball Joints – K6693 1x Part# Pitman Arm – With 3 Grooves – K6654 1x Part# Front Steering Idler Arm – K6535 2x Part# Front Upper Control Arm and Ball Joint – K620053 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may « wander » as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : ES3488 K80631 ES3609 K6693 K6654 K6535 K620053 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts Manufacturer Part Number : TA80190701P Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm,Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Quantity : 12 Pcs Bundle Description : Control Arm with Ball Joint Idler Arm Pitman Arm Cross Reference Part Number : Steering & Suspension Kit Sway Bar Link Tie Rod Kit Set Package Includes : 12 Piece Set Front Left Right Driver Side Passenger Side Type : Control Arm & Ball Joint Assembly Cross Reference Part Number 1 : 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Partslink-number : Sierra 2500 Sierra 2500 HD Sierra 2500 HD Classic Sierra 3500 Cross Reference Part Number 1 : Avalanche 2500 H2 Sierra 1500 HD Sierra 1500 HD Classic Cross Reference Part Number 1 : Sierra 3500 Classic Silverado 1500 HD Silverado 1500 HD Classic Cross Reference Part Number : Silverado 2500 Silverado 2500 HD Silverado 2500 HD Classic Cross Reference Part Number : Silverado 3500 Silverado 3500 Classic Suburban 2500 Cross Reference Part Number : Yukon XL 2500, Chevy GMC Hummer Ball Joint Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Discount Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales 2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364 USD 17.69 Upstream & Downstream Oxygen O2 02 Sensor For 2001-2005 Honda Civic 1.7L D17A7 USD 22.81 Throttle Body for Dodge Avenger Journey Caliber Jeep Patriot Compass 2.4L 2.0L USD 46.99 2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500 USD 19.49 2 For Dodge Challenger 2008-2014 Keyless Entry Remote Control Car Key Fob USD 21.59 Newly Listed 6x Front Lower Control Arm Tie Rod Sway Bar End Link For 1992-1996 Toyota Camry USD 86.39 10x Front Steering Upper Control Arms Set Fits 2007-2008 09 Chrysler Aspen 5-Lug USD 94.61 6Pc Front Lower Control Arms Tie rod Ball Joints Set Fits 01-02 Chrysler Voyager USD 86.77 8pcs Front Control Arm Tie Rod Sway Bars For 2001 Dodge Stratus Chrysler Sebring USD 87.58 Fits 1995-1997 Ford Explorer 8x Front Control Arms Ball Joints Tie Rod Links USD 74.07 Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us 12pc Front Complete Suspension Kit for Chevy Silverado GMC Sierra 2500 3500 HD 1.Fit For 2002-2006 Chevrolet Avalanche 2500 2001-2006 Chevrolet Silverado 1500 HD 2001-2004 Chevrolet Silverado 2500 2001-2010 Chevrolet Silverado 2500 HD 2001-2006 Chevrolet Silverado 3500 2007-2010 Chevrolet Silverado 3500 HD 2001-2010 Chevrolet Suburban 2500 2001-2006 GMC Sierra 1500 HD 2007-2010 Chevrolet Silverado 3500 HD 2001-2010 Chevrolet Suburban 2500 2001-2006 GMC Sierra 1500 HD 2001-2004 GMC Sierra 2500 2001-2010 GMC Sierra 2500 HD 2001-2006 GMC Sierra 3500 2007-2010 GMC Sierra 3500 HD 2001-2010 GMC Yukon XL 2500 2003-2007 Hummer H2 2007 Chevrolet Silverado 3500 Classic 2007 GMC Sierra 1500 HD Classic 2007 GMC Sierra 1500 HD Classic 2007 GMC Sierra 2500 HD Classic 2007 GMC Sierra 3500 Classic 2007 Chevrolet Silverado 1500 HD Classic 2007 Chevrolet Silverado 2500 HD Classic 2.Package Includes: Upper Ball Joints Come Pre-Assembled Onto the Upper Control Arms 2x Part# Front Inner Tie Rods Ends – ES3488 2x Part# Front Sway Bars End Links – K80631 2x Part# Front Outer Tie Rods Ends – ES3609 2x Part# Front Lower Ball Joints – K6693 1x Part# Pitman Arm – With 3 Grooves – K6654 1x Part# Front Steering Idler Arm – K6535 2x Part# Front Upper Control Arm and Ball Joint – K620053 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may « wander » as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : ES3488 K80631 ES3609 K6693 K6654 K6535 K620053 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts Manufacturer Part Number : TA80190701P Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm,Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Quantity : 12 Pcs Bundle Description : Control Arm with Ball Joint Idler Arm Pitman Arm Cross Reference Part Number : Steering & Suspension Kit Sway Bar Link Tie Rod Kit Set Package Includes : 12 Piece Set Front Left Right Driver Side Passenger Side Type : Control Arm & Ball Joint Assembly Cross Reference Part Number 1 : 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Partslink-number : Sierra 2500 Sierra 2500 HD Sierra 2500 HD Classic Sierra 3500 Cross Reference Part Number 1 : Avalanche 2500 H2 Sierra 1500 HD Sierra 1500 HD Classic Cross Reference Part Number 1 : Sierra 3500 Classic Silverado 1500 HD Silverado 1500 HD Classic Cross Reference Part Number : Silverado 2500 Silverado 2500 HD Silverado 2500 HD Classic Cross Reference Part Number : Silverado 3500 Silverado 3500 Classic Suburban 2500 Cross Reference Part Number : Yukon XL 2500, Chevy GMC Hummer Ball Joint Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On DiscountShippingWarrantyReturnFeedback Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of Topcn-autoparts. All rights reserved.
Frequently Asked Questions About 12pc Front Complete Suspension Kit for Chevy Silverado GMC Sierra 2500 3500 HD in My Website
hamelshoe.com is the best online shopping platform where you can buy 12pc Front Complete Suspension Kit for Chevy Silverado GMC Sierra 2500 3500 HD from renowned brand(s). hamelshoe.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling 12pc Front Complete Suspension Kit for Chevy Silverado GMC Sierra 2500 3500 HD on hamelshoe.com?
hamelshoe.com helps you to shop online and delivers Levi’s to your doorstep. The best-selling Levi’s on hamelshoe.com are: Levi’s Men’s 501 Original Fit Men’s Jeans Two Face Indigo 005012765 Levi’s 505 Jeans Men’s Straight Fit Blue Size 42X30 Pockets Levi’s 550 Straight Jeans Men’s Size 40X30 Blue Medium Wash 5-Pocket Cotton Levis Workwear Fit Jeans 30×32 Beige Straight Utility Stretch Over Boot Pants LEVI’S 527 Jeans Men’s Bootcut Black Denim Jeans Faded EUC Size 34×30 501 Levis Mens Jeans Classic Fit 30 x 30 (28) Light wash Blue đź‘–Levi’s Men’s 501 Original 36 X 30 Jeans Button Fly Straight Leg Camo Print NWT Levis 550 Jeans Size 52×29 Mens Relaxed Fit Blue Denim MEASURES 50×29 VTG Levi’s 517 Bootcut Jeans Men’s 38×30 Measured 36×29 Orange Tab Made USA Signature Levi Strauss Straight Whiskered Wash Out Fading Blue Jeans Mens 38×30 Levi’s Mens Size 40 x 31 Jeans 541 Medium Blue Denim Athletic Taper Fit Stretch Levis 541 Jeans Mens 33×30 Blue Ripple Faded Athletic Straight Fit Denim WD07406 REALLY NICE ****LEVI’S**** SLIM FIT MENS BLUE JEANS 31X32 (msr 29″x31″) Levi’s Men’s 501 Original Fit Jeans On My Radio 005013306 Levis Jeans Mens 36×32 550 Relaxed Fit Straight Leg Levi’s 559 Jeans Mens 38×34 Relaxed Straight Med Wash Fade Levi’s 505 Jeans Men 38×32 Zip Fly Blue Denim Levi’s 501 Button Fly Distressed Jeans Men’s Size 42×30 Blue Levi’s 550 Jeans Mens 44×30 Relaxed Fit Straight Loose 100% Cotton Denim Blue Vintage Levis Jeans Mens 36×36 (ACT. 33×35) Blue 550 Relaxed Fit Denim Cotton Levi’s 569 Jeans Baggy Men’s 34×32 Fits 36×30 Y2K Vintage Skater Grunge Wrangler USA Vintage 965AHDK Straight Fit Jeans Med Wash Excellent Levi’s Flex Eco Ease Men’s 541 Athletic Taper Stretch Jeans Sz. 38×30 New! #0112 Mens Levi Strauss 541 Denim Jeans Size 34×36 Medium Wash Levi’s 514 Straight Fit Jeans Mens Tag 36×36 Act 34×33 Blue Dark Wash Cotton 2 Pairs Men’s 32 X 30 Denizen From Levi’s & Signature Gold By Levis Strauss & Co mens levi’s 501 button fly stretch jeans 31×34 nwt $79.50 rips faded distressed Levis Denizen Jeans 216 Slim Men’s 32X30 Soft Black Super Flex Comfort LEVI’S 505 dark blue pure cotton Straight Jeans 38×30 LEVI’S 505 blue pure cotton Straight Jeans 36×30 distressed style Levi’s Jeans Mens 34X34 Blue 514 Denim Red Tag Flat Front Pockets Straight Leg Levis Jeans Mens 36×30 (ACT. 34×29) Black 527 Slim Bootcut Dark Stretch Western Levis Vintage Clothing Casuals 1960s Crew Sweatshirt Peanut Green Levis LVC Levi Levis Pants Adult 30 Blue Denim Jeans 510 Premium Big E Light Wash Skinny 30×34 Levis 501XX Jeans Mens 33×32 Gray Charcoal Button Fly Straight Denim 100% Cotton Levi Strauss & Co. 31×32 Mens Jeans Dark Wash EUC 100% Cotton #G Levi’s 514 Straight Fit Men’s Jeans Wash: Midnight Style# 00514-0403 Men’s Levi’s 517 Bootcut Jeans Medium StoneWash Size 36×34 100% Cotton VTG Levi’s 505 men’s light blue denim jeans size 40 USA Levi’s 505 Men’s Black Regular Fit Straight Leg Jeans Size 34×32 100% Cotton NWT Levi’s 501 Original Fit Straight Leg JeansBlue Men’s Size 38X32 Button Fly New Levi’s Workwear Fit Jeans Men’s Regular Fit Straight Stretch Zip Mid Wash Blue NWT Levi’s 513 jeans 36 x 32 Slim Straight Fit Retail $80 Style # 08513-0124 Levi’s 505 38×30 Blue Jeans Actual Measurements 38 5/8”x29 11/32” Levis 505 Relaxed Jeans Straight Blue 36 X 30 Mens School Men’s Levi’s 511 Slim Stretch, Blue – Size 38×34 Vtg Levi’s 501 Jeans Size 38×30 – Men’s Y2K (yr 2000) Levis 501 Jeans Men 38×32 Blue Original Straight Button Fly Med Wash Denim Levi’s® 501 Original Regular Fit Men’s Jeans Onewash Blue (00501-0101) Vtg Levi’s 505 Mens Orange Tab Jeans Made in USA Dark Straight 40×32 Distressed 38×34 Levi’s Men’s 541 Athletic Fit Medium Wash Taper Leg 5 Pocket Denim Jeans Levis 505 Mens Faded Black Jeans 33×32 Made In Canada 33×30.5 Levis 527 Slim Bootcut Mens Jeans 33X32 #0239 Dark Blue W33L32 Levi’s Levis Strauss Signature Jeans Mens 36×30 Blue Jeans Regular Straight Leg Vintage Levis 501 Jeans Mens 36×32 Black Button Fly Straight Leg Y2K Denim USA Levis 505 Jeans Mens 34×30 Blue Regular Straight Mid Rise Stretch Denim LEVI’S 501 BUTTON FLY JEANS SZ: 50 X 29 NWT Levi’s 541 Mens Jeans sz 40×30 Blue Denim Athletic Straight Leg Medium Wash Levi’s 511 Men Blue Straight Slim Stretch Jeans W31 L31 (92472) Levis Jeans Mens 34×32 Blue 512 Denim Slim Taper Stretch Flex Modern Dark Wash Levis 501 Jeans Mens 34×36 Blue Button Fly Modern Classic Distressed American Vintage Levis 517 Jeans Mens 32×30 Blue Faded Bootcut Western Raw Hem Levi’s 513 Slim Cut Straight Leg Flex Jeans Classic Modern 30×31* (*Tag 30×32) Men’s Slim Fit Jeans 36×32 Dust Brown Total Flex Goodfellow Denim Cotton Levi’s Premium 541 Athletic Taper Jeans Black WStretch 33X32 NWT RT$79 0147 C8 Levis Jeans Men’s Tag 34×32 Blue 511 Slim Straight Zip Fly Denim Pants Levis 505 Jeans Mens 34×30 Blue Regular Straight Mid Rise Stretch Denim a Levi’s 559 Jeans Mens 44×32 Tag 44×29 Fit Relaxed Straight Fit Blue Denim Jeans LEVI’S 501 W34 L32 Straight Fit Medium Blue Wash Button Fly Original Jeans Mens Levi’s 550 Dad Jeans Relaxed Fit Tapered Leg Blue 100% Cotton 31×32 Measured Levi’s 501 Original Fit Straight Leg Button Fly Patchwork Denim Jeans Size 36 Levi’s 541 Athletic Taper Fit Gray Denim Jeans Men’s Size 40×32 Medium Wash Levis Jeans Mens 40×32 Original 501 Blue Button Fly Denim Straight Leg Pants NWT Levi’s 569 Jeans Loose Fit Straight Leg Faded 100% Cotton Denim Blue Men’s 34×32 NWT Levi’s 513 jeans 33 x 32 Slim Straight Fit Retail $80 Style # 08513-0124 Vintage LEVIS 560 Loose Fit Tapered Leg Jeans Tag Size 38×36 90’s Levi’s 541 Athletic Jeans 34×35 Blue Pants Stretch Work Faded Denim Tag 34×36 Vtg Levi’s 517 Mens Jeans Bootcut 34X34 Denim Med Blue Wash Red Tab 100% Cotton Levis Jeans Mens 31×32 Blue 550 Relaxed Fit Tapered Medium Wash Denim Red Tab Levis 512 Jeans Slim Tapered Stretch Blue Levi Strauss Mens 34×30 Levis 511 Jeans Mens Brown/Green Slim Fit Straight Flex Denim Pants Size 30×30 Levis 511 Mens Denim Jeans RedTag 32X32 Levi’s 517 Jeans Boot Cut Slim Fit Size 38 x 34 Style # 005170216 Red Tag Levi’s 511 Men’s Slim FIT Dark Blue Jeans New with Tags (All Sizes) Levi’s 501 White Oak Cone Denim Button-Fly Jeans 26×29 Bronze Levis 501 Shrink To Fit Button Fly Jeans Color Light Blue 005012230 Vtg 90s Levi’s 505 Men’s Denim Jeans sz 34×30 Straight Regular Fit Pants Classic LEVI’S 559 Jeans Relaxed Straight Fit Blue Wash B&T Stretch Flex Size: 46×28 NWT Levis 514 Blue Jeans Mens 34×34 Denim Straight VTG Y2K 2002 Levi’s 550 Relaxed Fit Blue Jeans 34×33 Genuine LEVIS 510 Skinny Fit Stretch Mens Jeans LEVI Light Blue Levis 501 Jeans Mens 36×34 Brown Straight Leg Button Fly Y2K See Description NEW Levi’s 505 Mens 33×32 Regular Fit Straight Leg Jeans Blue Stretch Denim NWT Levis 501 XX Black Straight Leg Button Fly Mens Jeans – 38×34 Made In Guatemala Levi’s 559 Jeans Mens 42 X 30 Relaxed Straight Fit Dark Blue Flex Denim Distress Vintage Y2K Levi’s Silvertab Jeans Loose Fit Size 36 X 33 Baggy Skater ’90s USA Levi’s 505 jeans men’s 38×30 regular straight Flex blue denim pants NEW Levi’s 559 Jeans Men’s Relaxed Straight Blue 38 X 32 Light Wash Denim Stretch LEVI’S 559 blue Relaxed Fit Straight Jeans 38×30 Levi’s 550 Men’s Size 36×30 Blue Relaxed Straight Medium Wash 100% Cotton Jeans Mens Pullover Fleece Hoodie